complex mechanical design of shaft.
A solid steel shaft is supported on two bearings 1.8 m apart and rotates at 250
r.p.m. A 20° involute gear D, 300 mm diameter is keyed to the shaft at a distance of 150 mm to the left
on the right hand bearing. Two pulleys B and C are located on the shaft at distances of 600 mm and
1350 mm respectively to the right of the left hand bearing. The diameters of the pulleys B and C are
750 mm and 600 mm respectively. 30 kW is supplied to the gear, out of which 18.75 kW is taken off at
the pulley C and 11.25 kW from pulley B. The drive from B is vertically downward while from C the
drive is downward at an angle of 60° to the horizontal. In both cases the belt tension ratio is 2 and
the angle of lap is 180°. The combined fatigue and shock factors for torsion and bending may be
taken as 1.5 and 2 respectively.
Design a suitable shaft taking working stress to be 42 MPa in shear and 84 MPa in tension
complex mechanical design of shaft
.awasam-promo3 {
background-color: #F5F9FF;
color: #000000;
text-align: center;
padding: 20px;
border-radius: 10px;
}
.button {
background-color: #4CAF50;
border: none;
color: white;
padding: 10px 20px;
text-align: center;
text-decoration: none;
display: inline-block;
font-size: 16px;
margin: 4px 2px;
cursor: pointer;
border-radius: 5px;
}
.button-whatsapp {
background-color: #41D07D;
border: none;
color: white;
padding: 10px 20px;
text-align: center;
text-decoration: none;
display: inline-block;
font-size: 16px;
margin: 4px 2px;
cursor: pointer;
border-radius: 5px;
}
.awasam-alert {
color: red;
}
Needs help with similar assignment?
We are available 24×7 to deliver the best services and assignment ready within 6-8 hours? Order a custom-written, plagiarism-free paper
Get Answer Over WhatsApp
Order Paper Now
