safety program management , Elements of a Safety Program
4A1: Elements of a Safety Program
Utilize the OSHA Respiratory Protection Standard to identify the elements that you are required to include in your program for Wildcat Welding & Manufacturing. Incorporate the elements that you identify from the standard into an outline. Be detailed in your research your goal is to create a document that could be used to prevent a catastrophic event.
For Example: If I were to create a Confined Space Program, I would complete an outline with the following areas identified from 29 CFR 1910.146.
1910.146 Confined Space Program
Table of Contents
Objective
Background
Assignment of Responsibility 29 CFR 1910.146(i)
Employer
Program Manager
Entry Supervisors 29 CFR 1910.146 (j)
Attendants
Rescue Team
Entrants/Affected Employees
Training 29 CFR 1910.146(g)
Training Frequency
General Training
Specific Training
Verification of Training
Identification of Hazards and Evaluation of Confined Spaces 29 CFR 1910.146(c)
Survey
Hazard Reevaluation
Pre-Entry Hazard Assessment
Hazard Controls
Entry Permits 29 CFR 1910.146(f)
Key Elements of Entry Permits
Permit Scope and Duration
Entry Procedures 29 CFR 1910.146(h)
Prior to Entry
Opening a Confined Space
Atmospheric Testing
Isolation and Lockout/Tagout Safeguards
Ingress/Egress Safeguards
Warning Signs and Symbols
Emergency Response 29 CFR 1910.146(k)Attachment, Example Confined Space Entry Permit
Emergency Response Plan
Retrieval Systems and Methods of Non-Entry Rescue
Assessment Rubric:
Identification of Safety Program Elements
Levels of Achievement
Criteria
Novice
Competent
Proficient
Element Identification Weight 75.00%
0 %Learner identified some elements (less than 50%) of the safety program requirements from the regulatory standard requirements.
50 %Learner identified some elements (over 50%) of the safety program requirements from the regulatory standard requirements.
100 %Learner identified all elements of the safety program requirements from the regulatory standard requirements.
Regulation Documentation Weight 25.00%
0 %Learner did not document the areas where the information was found within the regulation.
50 %Learner documented some of the areas where the information was found within the regulation.
100 %Learner documented the areas where the information was found within the regulation.
“0.
Discount Code: 0
: +1 0 0-0
0..
