TCP/IP
Outcomes addressed in this activity:
Describe ICMP messages
Use ping, tracert and pathping
Explain IGMP
Course outcome
Describe the protocols and services available at each layer of the TCP/IP model.
Instructions
This Unit Assignment will cover ICMP messages, using ping, tracert and pathping commands and IGMP.Requirements
Open a command prompt. Open Wireshark and set it to capture. In the command prompt type ping google.com. Take a screen capture of the Wireshark window. Analyze the output of the PING. Explain the process the ICMP messages are using.
Open a command prompt. Open Wireshark and set it to capture. In the command prompt type tracert google.com. Take a screen capture of the Wireshark window. Analyze the output. Explain the process the ICMP messages are using
Given the following pathping output, explain the process as well as what the output tells you.
D:>pathping -n testpc1
Tracing route to testpc1 [7.54.1.196]
over a maximum of 30 hops:
0 172.16.87.35
1 172.16.87.218
2 192.168.52.1
3 192.168.80.1
4 7.54.247.14
5 7.54.1.196
Computing statistics for 125 seconds
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct Address
0 172.16.87.35
0/ 100 = 0% |
1 41ms 0/ 100 = 0% 0/ 100 = 0% 172.16.87.218
13/ 100 = 13% |
2 22ms 16/ 100 = 16% 3/ 100 = 3% 192.168.52.1
0/ 100 = 0% |
3 24ms 13/ 100 = 13% 0/ 100 = 0% 192.168.80.1
0/ 100 = 0% |
4 21ms 14/ 100 = 14% 1/ 100 = 1% 7.54.247.14
0/ 100 = 0% |
5 24ms 13/ 100 = 13% 0/ 100 = 0% 7.54.1.196
Trace complete.
Write a brief synopsis on IGMP. What is it? What is its use? How is it used? Be sure to use your own words.+
Written Requirements:
Written work should be free of spelling, grammar, and APA errors. Points deducted from the grade for each writing, spelling, or grammar error are at your instructors discretion.
Open a command prompt. Open Wireshark and set it to capture. In the command prompt type ping google.com. Take a screen capture of the Wireshark window. Analyze the output of the PING. Explain the process the ICMP messages are using.
0 10
Open a command prompt. Open Wireshark and set it to capture. In the command prompt type tracert google.com. Take a screen capture of the Wireshark window. Analyze the output. Explain the process the ICMP messages are using
0 10
Given the following pathping output, explain the process as well as what the output tells you.
D:>pathping -n testpc1
Tracing route to testpc1 [7.54.1.196]
over a maximum of 30 hops:
0 172.16.87.35
1 172.16.87.218
2 192.168.52.1
3 192.168.80.1
4 7.54.247.14
5 7.54.1.196
Computing statistics for 125 seconds
Source to Here This Node/Link
Hop RTT Lost/Sent = Pct Lost/Sent = Pct
0 10
Project Grading Rubric
Course: IT283 Unit: 3 Points: 40
Copyright Kaplan University
Address
0 172.16.87.35
0/ 100 = 0%|
1 41ms 0/ 100 = 0% 0/ 100 = 0% 172.16.87.218 13/ 100 = 13% |
2 22ms 16/ 100 = 16% 3/ 100 = 3% 192.168.52.1 0/ 100 = 0% |
3 24ms 13/ 100 = 13% 0/ 100 = 0% 192.168.80.1 0/ 100 = 0% |
4 21ms 14/ 100 = 14% 1/ 100 = 1% 7.54.247.14 0/ 100 = 0% |
5 24ms 13/ 100 = 13% 0/ 100 = 0% 7.54.1.196
Trace complete.
Write a brief synopsis on IGMP. What is it? What is its use? How is it used? Be sure to use your own words.
0 10
Column TotalLess deduction taken for spelling, grammar, and APA errors. Plagiarism is totally unacceptable.
New total after deductions
“0.
Discount Code: 0
: +1 0 0-0
0..
